Bluetooth Meter

1-Phase Bluetooth Electricity Meter

The meter is a Class 1.0 Accuracy electric energy metering instrument with the high manufacturing technology to realize the measurement and control of active energy, and it supports the standard DLMS/COSEM specification, to realize the interoperability under master station.The meter mainly includes measurement unit, display unit, button unit, real-time clock unit, function of infrared and Bluetooth communication with other auxiliary ports that can be programmable.

TECHNICAL DATA

Full Product Specifications

ModelN21
Communication TypeBluetooth
Normal voltage230VAC
Normal frequency50 Hz
Current rating10(100) A
Measurement ratingClass 1.0 kWh, Class 2.0 kVarh
Operating temperature– 25°C ∼ +60°C
Storage temperature– 40°C ∼ +85°C
Insulation voltage4 kV
Impulse voltage10 kV
Calendar typeGregorian
Display typeLCD – Liquid Crystal Display

Related Products

PD Doctor brings precise and reliable diagnostics and online monitoring of isolation conditions at medium (and low) voltage lines and devices in transformer and switchboard stations.It increases the reliability of the power supply, as it detects the power line damage, and immediately identifies and reports operational states and anomalies. The system saves online data and plays the role of a black box, where it is possible to analyze the history of operational states, including incidents just right prior to the failure.Partial discharge online monitoring enables to observe of the degradation process of power lines and devices and indicates the necessity of intervention for better repair planning. PD Doctor allows to decrease actually necessary prophylactics costs by thousands of USD annually and lowers field visits.PD Doctor helps to protect every electrical device – generators, electric motors, transformers, cable lines, overhead cables, switchboards and switchgears. Online measuring significantly decreases costs of new devices installation, as it allows to use a technical lifetime of devices and lines maximally. They can thus be safely and reliably operated until the physical (and not only theoretical, and statistical) end of their lifetime.
Overhead type Line Fault Indicators is based on the sensor that through Current Transformer (CT) to get the line current signal through smart processor and calculation to judge the short circuit or ground fault. The sensor ablet to warn the user through red LED equipped. It is beneficial for power management to find the fault points and to help in restoring the faulty line faster.
DLIM-412 Industrial 4.0 Technology Application Training System is one engineer teaching system following the latest industrial 4.0 technology, it may be used for TVET vocational school to realize training projects like MOUDLEBUS communication between PLC and RFID; Profinet communication between PLC and PLC; Communication between MES and PLC; Application of bus communication technology; Application of motor drive technology; Mechatronics collaborative simulation: mechanical interference, mechanism kinematics etc.
Fluke 83V and 87V Digital Multimeters is For all detailed specifications.Accuracy is given as ±([% of reading] + [number of least significant digits]) at 18 °C to 28 °C, with relative humidity up to 90 %, for a period of one year after calibration. For Model 87 in the 41⁄2-digit mode, multiply the number of least significant digits (counts) by 10. AC conversions are ac-coupled and valid from 3 % to 100 % of range. Model 87 is true-rms responding. AC crest factor can be up to 3 at full scale, 6 at half scale. For non-sinusoidal wave forms add -(2 % Rdg + 2 % full scale) typical, for a crest factor up to 3.